Large Motorized Machining Spindle Rebuilt

Speedy domestic spindle service saves time, money and trouble for U.S. machine tool builder.


Used in the automotive and heavy equipment industries to hold brake drums, fly wheels, hubs, and rotors, differential cases and housings while machining is performed, these spindles typically produce over 2,000 brake rotors per day, the spindles themselves acting as loading/unloading devices.


The machine tool spindle being used was foreign-made, and servicing the spindles was problematic for domestic installations. Because the spindles were of a proprietary design, spindle rebuild was difficult.

motorized machining spindle


With complete capabilities to perform both the engineering and the manufacturing required for the spindles’ rebuild, Gilman’s Spindle Service Center was the logical choice for faster, more economical, on-shore rebuilding.

Cost Savings

By having Gilman Precision’s Spindle Rebuilding Center do the work instead of shipping the spindles overseas, the manufacturer realized savings of thousands of dollars per spindle.

Time Line

By eliminating the time required to ship overseas, Gilman was able to reduce the turnaround time on rebuilt spindles by weeks.

Motorized Machining Spindle

Spindle Rebuild Process

  • Disassembly and inspection of spindles
  • Inspect shaft-bearing journal diameters for sizing and concentricity
  • Inspect housing-bearing bores for sizing and concentricity
  • Re-manufacturing spindle parts as necessary and aline tolerances to original specifications
  • Inspect motor parts and repair
  • Each spindle receives a run-off test and carries a new spindle warranty upon leaving the Gilman Precision Spindle Service Center

Technical Specifications

  • Weight: 1,050 lbs.
  • Bearings: 110mm ball bearings – front 85mm cylindrical roller bearings – rear
  • Max. Speed: 4,000 RPM
  • Operating Speed: 3,000 RPM
  • Max, Forces: Axial load: 2,300N; Radial load: 9,000N
  • Lubrication: Grease
  • Running Accuracy: Axial and radial runout; < 5µm
  • Balancing Quality: G 2.5
  • Power (100% operation): PS1=28 kW between n=900 and 4,000 RPM
  • Torque (100% operation): Mnom S1 = 340 Nm at n=900 RPM
    Have A Question?

    Contact Us

    Please fill out the form below & we will contact you in a timely fashion.